Fixed Site Skid Systems

Fixed Site Skid Systems

The Aquadose Q Dose & AQ Dose Fixed Site Dosing Skids

 

The Aquadose fixed site ‘SKID’ based Q and AQ Sodium Hypochlorite Dosing systems are designed to meet requirements for residual chlorine boosting at remote locations in the water distribution network, such as Service Reservoirs & Pumping Stations.

The Q Dose systems are designed to provide straightforward flow proportional dosing within a suitable bunded enclosure with a marshalling box to house digital and analogue signals and telemetry alarms.

The more comprehensive AQ Dose systems use the Flow Proportional signal as primary dosing control with Residual Trim control available through the Dual Validation Chlorine analysers and V-Series Dosing Controller.

Data logging and graph trend data is available either onboard for USB download or through the remote access using water industry telemetry outstation or GSM.

The Aquadose Q Dose & AQ Dose Fixed Site Dosing Skids

 

The Aquadose fixed site ‘SKID’ based Q and AQ Sodium Hypochlorite Dosing systems are designed to meet requirements for residual chlorine boosting at remote locations in the water distribution network, such as Service Reservoirs & Pumping Stations.

The Q Dose systems are designed to provide straightforward flow proportional dosing within a suitable bunded enclosure with a marshalling box to house digital and analogue signals and telemetry alarms.

The more comprehensive AQ Dose systems use the Flow Proportional signal as primary dosing control with Residual Trim control available through the Dual Validation Chlorine analysers and V-Series Dosing Controller.

Data logging and graph trend data is available either onboard for USB download or through the remote access using water industry telemetry outstation or GSM.

HMI Dosing Controller

Touchscreen dosing controller designed for simple and efficient operator set up. FLOW PROPORTIONAL dosing control with Residual Trim Control available when used with suitable post dose Analysers.

On Board Data Logging

Location, Dosing Parameters, Water &, Dose Chemical usage with Graph Data for Dose Pump Speed, Chlorine Residual and Water Plant Flow trends.

Data Cloud Storage

Auditable dosing data is recorded and stored both onboard and via a secure cloud storage.

Telemetry Signal & Alarms

Chemical Carboy / Stock Tanks Low, Low-Low & Empty / Dose Pump Failure / Bund Fill / Plant Flow / Cl2 Residual.

Mobile phone & Tablet APP

Designed for easy operator use for full ‘hands off’ control and monitoring. with remote to site access if required.

Automated Dilution

Management of the stock dose chemical dilution batching is also available if required.

Dose Pumps and Carrier Water Pumps Management

The schedule and control management of the Dosing Pumps operation is also included within the V-Series interface along with carrier water pump management, if required.

All Component Fittings, Materials, Solvent Cements and Adhesives used within the manufacture of the Aquadose range of equipment are WRAS Approved and compliant with DWI LIST OF APPROVED

PRODUCTS for use in Public Water Supply in the United Kingdom.

The Fixed Site AQ Dose Dimensions & Specification

Interior (L X W X D)Dependent on Size and Quantity of Chemical Stock Tanks and Dose Pumps
Exterior (L X W X D)The AQ skid shown in the image photo* has 1 x 250L / 1 x 60L Tanks / 2 x Dose Pumps and is typically: 6.56’ x 3.28’ x 5.91’ (2.00m x 1.00m x 1.80m)
WeightDependent on Size and Quantity of Chemical Stock Tank and Dose Pumps
O+M AccessTwo Clear sliding doors can be easily removed required.
*AQ Skid with 250L & 60L Tanks / 2 x Dose Pumps
Automated Chemical DilutionThe AQ skid shown in the attached photos* has a venturi dilution panel, the softened water and chemical inlet solenoid valves are controlled via the V-Series Controller.
Dosing CapacityDependent on Size and Quantity of Chemical Stock Tank and Dose Pumps. The AQ skid shown in the attached photo* has 2 x 2Ltr/Hr Dose Pumps (multiple Dose Pump options for Pre & Post dosing are also available).
Dosing ControlThe schedule and control management of the Dosing Pumps operation is also available within the V-Series interface along with carrier water pump management, if required.
*AQ Skid with multiple dose pumps for Pre and Post dosing.

The Aquadose AQ Dose & Q Dose Fixed Site Dosing Skids

The Fixed Site Q Dose Dimensions & Specification

Interior (L X W X D)Dependent on Size and Quantity of Chemical Stock Tanks and Dose Pumps.
Exterior (L X W X D)The Q skid shown in the photo* has 1 x 250L Bund / 1 x 140Ltr Stock Tank / 1 x Dose Pump and is typically: 5.02’ x 2.43’ x 6.07’ (1.53m x 0.74m x 1.85m)
WeightDependent on Size of Chemical Stock Tank and Size and Quantity of Dose Pumps.
O+M AccessRemovable clear dose pump guard / easy access bund.
Dose Chemical Transfer PumpThe Q Dose system typically uses neat dose chemical which is simply and safely transferred from manufacturers carboys using the electrically powered hand operated dose chemical transfer pump.
*Q-Dose with 250L Bund / 140Ltr Stock Tank / Dose Pump / Dose Chemical Transfer Pump
Dosing CapacityDependent on Chemical Stock Tank Size and Quantity of Dose Pumps. The Q skid shown in the photo* has 1 x 2Ltr/Hr Dose Pump.
Dosing ControlTypically the dose pump operation and scheduling are controlled via a selector switch on the bund marshalling enclosure. The Dosing rate can be controlled flow proportionally via an Analogue or Pulsed signal input, or via a Contact On/Off, if required.

A Chlorine High Dose Inhibit can also be used with a contact relay from a suitable Post Dose Analyser.

An Aquadose HMI Dosing Controller can also be supplied with the Q Dose systems to provide additional functions.
*Q-Dose Skid

Contact Us

Tel: +44 (0)7766 135 771
Email: info@aquadose.co.uk