Portable & Mobile Dosing Equipment

Portable & Mobile Dosing Equipment

Portable & Mobile Dosing

 

Aquadose manufacture a technologically advanced and simple to use range of Portable and Mobile equipment that allows clients to comprehensively control and audit any chemical dosing task that is carried out within the water distribution networks.

The Aquadose range of Portable and Mobile equipment is designed to perform flow proportional control of the chlorination and dechlorination chemical dosing procedures, typically using Sodium Hypochlorite solution for the disinfection process, and Sodium Thiosulphate or Sodium Bisulphate solutions for the dechlorination process. The Aquadose equipment also allows operators to access the residual feedback trim control when used with a portable Inline Chlorine Monitor (ICM), PRE and POST ICM equipment further verifies the parameters within any final treated or discharge water.

 

Portable & Mobile Dosing

 

Aquadose manufacture a technologically advanced and simple to use range of Portable and Mobile equipment that allows clients to comprehensively control and audit any chemical dosing task that is carried out within the water distribution networks.

The Aquadose range of Portable and Mobile equipment is designed to perform flow proportional control of the chlorination and dechlorination chemical dosing procedures, typically using Sodium Hypochlorite solution for the disinfection process, and Sodium Thiosulphate or Sodium Bisulphate solutions for the dechlorination process. The Aquadose equipment also allows operators to access the residual feedback trim control when used with a portable Inline Chlorine Monitor (ICM), PRE and POST ICM equipment further verifies the parameters within any final treated or discharge water.

 

HMI Dosing Controller

Touchscreen dosing controller designed for simple and efficient operator set up. FLOW PROPORTIONAL dosing control with Residual Trim Control available when used with Inline Analysers.

On Board Data Logging

Location, Dosing Parameters, Water &, Dose Chemical usage with Graph Data for Dose chemical and water trends.

Data Cloud Storage

Auditable dosing data is recorded and stored both onboard and via a secure cloud storage.

Alarms

Dose Chemical Carboy Low & Empty / Equipment over-range / Battery Power Low.

Mobile Phone & Tablet APP

Designed for easy operator use for full ‘hands off’ control and monitoring. with remote to site access if required.

Full Bore Flow Measurement

Providing more accurate flow measurement throughout the entire flow range.

All Component Fittings, Materials, Solvent Cements and Adhesives used within the manufacture of the Aquadose range of equipment are WRAS Approved and compliant with DWI LIST OF APPROVED

PRODUCTS for use in Public Water Supply in the United Kingdom.

The AD1-150 Dimensions & Specifications

Interior (L X W X D)21.68” x 16.62" x 10.56" (55.1 x 42.2 x 26.8 cm)
Exterior (L X W X D)4.71” x 19.58" x 11.93" (62.8 x 49.7 x 30.3 cm)
Lid Depth2.06" (5.2 cm)
Bottom Depth8.50" (21.6 cm)
Total Depth10.56" (26.8 cm)
Int Volume2.2 ft³ (0.062 m³)
Weight< 20 kg (< 44.00 lbs)
AD1-150 Flow Range5Ltrs/min (0.08Ltrs/sec) up to 300Ltrs/min (5Ltrs/sec)
Dose Rate Capacity7Ltrs/Hr
Power Capacity (Per Battery Pack)14Hrs (approx.)

The AD1-200 Dimensions & Specifications

Interior (L X W X D)21.68” x 16.62" x 10.56" (55.1 x 42.2 x 26.8 cm)
Exterior (L X W X D)4.71” x 19.58" x 11.93" (62.8 x 49.7 x 30.3 cm)
Lid Depth2.06" (5.2 cm)
Bottom Depth8.50" (21.6 cm)
Total Depth10.56" (26.8 cm)
Int Volume2.2 ft³ (0.062 m³)
Weight< 22 kg (< 49.00 lbs)
AD1-200 Flow Range5Ltrs/min (0.08Ltrs/sec) up to 600Ltrs/min (10Ltrs/sec)
Dose Rate Capacity9Ltrs/Hr
Power Capacity (Per Battery Pack)14Hrs (approx.)

The AD1-205 Dimensions & Specifications

Interior (L X W X D)27.70" x 20.98" x 15.50" (70.4 x 53.3 x 39.4 cm)
Exterior (L X W X D)31.28" x 24.21" x 17.48" (79.5 x 61.5 x 44.4 cm)
Lid Depth3.25" (8.3 cm)
Bottom Depth12.14" (30.8 cm)
Total Depth15.39" (39.1 cm)
Int Volume5.21 ft³ (0.148 m³)
Weight< 25 kg (< 55.00 lbs)
AD1-205 Flow Range5Ltrs/min (0.08Ltrs/sec) up to 900Ltrs/min (15Ltrs/sec)
Dose Rate Capacity15Ltrs/Hr
Power Capacity (Per Battery Pack)12Hrs (approx.)

The AD-ICM (Inline Chlorine Monitors)

Dimensions & Specifications

Interior (L X W X D)19.92" x 14.98" x 9.00" (50.6 x 38 x 22.9 cm)
Exterior (L X W X D)22.07" x 17.92" x 10.42" (56.1 x 45.5 x 26.5 cm)
Lid Depth2.00" (5.1 cm)
Bottom Depth7.00" (17.8 cm)
Total Depth9" (22.9 cm)
Int Volume1.55 ft³ (0.044 m³)
Weight< 19 kg (< 42.00 lbs)
Power Capacity (Per Battery Pack)72Hrs (approx.)

The ADT-400 Trailer Dimensions & Specifications

Interior (L X W X D)7.87’ x 4.82’ x 6.00’ (2.4m x 1.47m x 1.82m)
Exterior (L X W X D)13.45’ x 6.88’ x 7.70’ (4.1m x 2.1m x 2.35m)
Int Volume1.55 ft³ (0.044 m³)
ADT-400 Flow Range11Ltrs/min (0.18Ltrs/sec) up to 2,400Ltrs/min (40Ltrs/sec)
Dose Rate Capacity80Ltrs/Hr
Power Capacity (Per Battery Pack)48Hrs (approx.)
Larger specification trailers are available on request.

Contact Us

Tel: +44 (0)7766 135 771
Email: info@aquadose.co.uk